Dewalt DCK229P2T Combi Drill and Hammer Drill Cordless Kit (2 x 5.0Ah)

DEWALT DCK229P2T-GB 18V XR COMBI HAMMER DRILL & SDS+ PLUS ROTARY HAMMER DRILL TWIN KIT INC 2X 5.0AH BATTERIES, 1X CHARGER & 2X DWST1-70703 TSTAK II SUITCASE FLAT TOP TOOL STORAGE BOXES

The DeWalt DCK229P2T XR Twin Pack contains the following: 1x DCD996 Combi Hammer Drill & 1x DCH273 SDS+ Plus Rotary Hammer Drill, plus 2x 5.0Ah Batteries, 1x DCB115 Charger & 2x DWST1-70703 TSTAK II Suitcase Flat Top Tool Storage Box, 1x N565020 Moulded Inlay & 1x 530863 Moulded Inlay.

DCD996N Combi Hammer Drill

The DeWalt DCD996 combi hammer is the successor to the DCD995, with an improved, larger brushless motor which delivers up to 34% more power. DeWalt have improved the airflow to this motor which keeps it cool and at the top of its performance. It features an improved automatic high speed for increasing the users masonry drilling speed.

The DEWDCD996N has a 3-speed gear box giving you ultimate control over blows-per-minute and revolutions-per-minute. For example, in gear three while in hammer mode you’ll have 38,250 blows per minute while the chuck spins at 2,250rpm.

There's also a newly improved, 3-stage, bae-mounted LED worklight. It has a maximum brightness of 60 lumens, enough to light up a huge work area and even bright enough to use solely as a torch. There's a sturdy switch built-in to the drill base to control the brightness.

FEATURES

• All metal nitro-carburised chuck prolongs life as it is stronger and rust resistant
• Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations
• 3 speed gearbox for a greater range of applications
• Larger brushless motor than previous model gives up to 34% increase in power
• Improved air flow to the motor keeps it cool under pressure
• Hammer Function increases speed to 2250rpm giving increased productivity
• Super bright base-mounted LED worklight with 3 LEDs which give a range from 2.6 to a massive 60 lumens

SPECIFICATION

• Voltage: 18v
• Power Output (W): 830
• Soft Application Max Torque (Nm): 66
• Hard Application Max Torque (Nm): 95
• Torque Settings: 11 + Drill
• Brake Type: Electric
• No. of Gears: 3
• LED Job Light: Yes / Delay / Base-mounted 
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (XR)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-2250
• No Load Speed (RPM) Med: 0-1500
• No Load Speed (RPM) Low: 0-500
• Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
• Chuck Capacity (mm): 1.5-13.0
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 15
• Drill Capacity: Wood (mm): 55
• Impact Rate (BPM) High: 0-38250
• Impact Rate (BPM) Med: 0-25500
• Impact Rate (BPM) Low: 0-8600
• Overall Length (mm): 213
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.2
• Brushless Motor: Yes

NOISE & VIBRATION

• Sound Pressure Level (LpA): 97 dB (A)
• Sound Power Level (LWA): 108 dB (A)
• Sound Uncertainty (K): 3 dB (A)
• Drilling Concrete Vibration Emission (ah): 15 m/s²
• Drilling Concrete Vibration Uncertainty (K): 3.9 m/s²
• Drilling Metal Vibration Emission (ah): 2.5 m/s²
• Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

DCH273 SDS+ Plus Rotary Hammer Drill

The DeWalt DCH273 offers up 1200 rpm no load speed producing an impressive 4500bpm - ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 20mm. It has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood, ceramic and steel - it's a well thought out tool with impressive spec.

FEATURES

• Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
• Brushless motor with high capacity XR 5.0Ah 18V Lithium-ion battery platform for extreme runtime and reduced maintenance
• Electronic clutch for consistently-high torque and improved durability
• Perform & Protect: best-in-class vibration at 6.6m/s², minimising user fatigue
• Bright white LED with delay feature improves visibility

SPECIFICATION

• Voltage: 18v
• Chuck Type: SDS+ Plus
• Drilling Modes: Rotary, Rotary Hammer & Chiselling
• Speed Control: Variable Speed
• Impact Energy: 2.1j
• Blows Per Minute: 4500
• Max Bit Capacity in Wood: 26 mm
• Max Bit Capacity in Metal: 13 mm
• Max Bit Capacity in Concrete: 20 mm
• No Load Speed: 1100 rpm
• Weight: 2.9kg